Serving the Cleveland area  ·  (216) 294-3900  ·  Open Mon-Sun 7am-7pm
📞 (216) 294-3900 Free Quote

Metal Roofing in Mentor, OH (44060) · Local Professionals

Cleveland Metal Roofing · Fast response in Mentor and the Cleveland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+230Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mentor is a lakefront city where the wind comes off Lake Erie and doesn't stop until it hits your roof. The mix of 1950s ranches, 1970s colonials, and newer subdivision homes along Mentor Avenue and Route 20 means we see every kind of roof, but the lake-effect snow and ice are the great equalizer.

Homeowners in 44060 call Cleveland Metal Roofing because we know how Mentor's freeze-thaw cycles punish shingles and how standing seam metal handles them. From the streets near Mentor High School to the older neighborhoods off Hopkins Road, we've worked on roofs that have seen decades of lake-effect squalls.

Metal Roofing in Mentor (44060)

Mentor sits on the glacial plain south of Lake Erie, and that means heavy clay soil, flat lots, and water that likes to sit. In older neighborhoods like those near Mentor Headlands, the soil drains slowly, and ice dams form fast at the eaves. Many homes here have low-pitched roofs that were built for asphalt shingles, so when we install metal, we pay close attention to ventilation and underlayment to prevent condensation. The tree canopy of maples and oaks is beautiful but drops limbs and debris that can clog gutters and scratch panels, so we often recommend gutter guards and snow guards on north-facing slopes.

Our team has been serving Mentor and the surrounding Cleveland area for years. We've replaced roofs on Capes in the Mentor-on-the-Lake area and installed standing seam on newer two-story homes off Center Street. We know the local building department's permit process and what it takes to get a job approved quickly.

Our services in Mentor

How a Job Works in Mentor

Step 1: You call us at (216) 294-3900 or request a free estimate online. We schedule an on-site assessment at your convenience, inspect your current roof, and talk through options like metal roof replacement or a retrofit over existing shingles. We'll check for ice dam history and attic ventilation issues that are common in Mentor's older homes.

Step 2: Once you approve the scope and price, we pull the required permits from the City of Mentor Building Department. Our insured crews then handle the installation, typically completing most residential roofs in one to three days. We protect your landscaping, coordinate with any HOA requirements, and keep you informed on progress. For lakefront properties, we often add snow guards to prevent sudden snow slides.

Step 3: After the work is done, we do a full cleanup, including magnet sweeping for nails, and walk the property with you to make sure you're satisfied. We leave your yard as clean as we found it and provide a written warranty on materials and labor.

Metal roofing in Mentor is priced by the square foot, and typical costs range from about $5.50 per square foot for corrugated panels to $10 or more for standing seam. A basic metal roof installation starts around $8 per square foot, while a full replacement averages $9. A retrofit over existing shingles can be as low as $7 per square foot, but that depends on the condition of your current roof and local code limits on layers. Repairs like leak fixes start at $450, and snow guards start at $1,200. The final price depends on roof size, pitch, access, and whether there are complicating factors like skylights or chimneys. Call us at (216) 294-3900 for a free, no-pressure estimate tailored to your Mentor home.

My house near Mentor Headlands gets ice dams every winter. Will a metal roof stop that?
Metal roofs shed snow more readily than shingles, but ice dams can still form if your attic is warm. We typically recommend adding proper insulation and ventilation along with snow guards and ice protection. Our team can assess your attic and roof assembly to design a system that minimizes ice dam risk specific to the lakefront microclimate.
A storm just peeled back some panels on my roof off Route 20. Can you come out today?
Yes, we offer emergency storm and wind damage repair. Call (216) 294-3900 and we'll dispatch an insured crew as soon as possible to secure the roof and prevent further water intrusion. We document the damage for insurance claims and can handle permanent repairs once the weather clears.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch in Mentor?
For a ranch that size, most replacements fall between $9,000 and $15,000 depending on the metal type, roof complexity, and whether we remove the old shingles. Standing seam is at the higher end, while corrugated panels are more budget-friendly. We provide a detailed written estimate after a free inspection.
Do I need a permit from the City of Mentor to replace my roof?
Yes, the City of Mentor Building Department requires a permit for roof replacements and some repairs. The exact requirements and fees vary, so we always verify with the department before starting work. We handle the permit application for you as part of our service.
My HOA has design rules. Can you help with approval for a metal roof?
We regularly work with HOAs in Mentor and can provide product samples, color charts, and specifications to submit for approval. We recommend getting HOA approval before signing a contract. If there are property line concerns, we follow local setback rules and can coordinate with your neighbor if needed.
Are you insured for work on my Mentor property?
Yes, Cleveland Metal Roofing is fully insured with general liability and workers' compensation coverage. We're happy to provide a certificate of insurance upon request so you can verify our coverage before work begins.
What maintenance does a metal roof need in Mentor's climate?
Inspect your roof and gutters each spring and fall, especially after heavy snow or wind. Clear debris from valleys and gutters to prevent water backup. Check fasteners and seals annually, and touch up any scratches to prevent corrosion. We offer maintenance plans and free inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Cleveland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Cleveland

All your work handled by qualified professionals in Cleveland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

230+ Verified Client Reviews in Cleveland

⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Cleveland · Response within 24h · No commitment · ☎ (216) 294-3900

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Cleveland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm