Serving the Cleveland area  ·  (216) 294-3900  ·  Open Mon-Sun 7am-7pm
📞 (216) 294-3900 Free Quote

Metal Roofing in Brunswick, OH (44212) · Local Professionals

Cleveland Metal Roofing · Fast response in Brunswick and the Cleveland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+230Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Brunswick is the kind of town where the neighborhoods tell a story by decade. Head south off Center Road and you'll find 1960s and 70s ranches and split-levels on generous lots, then newer two-story subdivisions out toward 303 and the Medina line. Big maples, heavy clay soil, and winters that dump lake-effect snow on low-pitch roofs. If your shingles are curling at the edges or you're shoveling the same drift off the same valley every year, it's probably time to talk metal.

Homeowners in 44212 call Cleveland Metal Roofing because we know how these roofs fail here. Ice dams form fast at the eaves on those 70s splits, and the freeze-thaw cycles work screws loose on older panel roofs. We're local, fully insured, and we've worked on enough Brunswick roofs to know where to look before the leak shows up in your ceiling.

Metal Roofing in Brunswick (44212)

Brunswick sits on the glacial plain south of Cleveland, and the ground here is heavy clay that holds water after a thaw. That matters for roof work because it affects how we set ladders, stage materials, and handle runoff. The housing stock is a mix: older ranches and split-levels with low-slope shingle roofs that are prone to ice damming, and newer subdivision homes with cut-up rooflines and multiple valleys where snow and water collect. Many of these lots are wide but shallow, so access can be tight when we're bringing panels in. We plan deliveries around driveways and side yards instead of assuming a clear path.

Our team has installed, repaired, and replaced metal roofs across Brunswick and the surrounding Cleveland suburbs. We know which panel profiles work on a low-pitch ranch, when a retrofit over existing shingles makes sense, and when tear-off is the better call. We also understand the local permit process and can tell you what the city building department typically requires before we start.

Our services in Brunswick

How a Job Works in Brunswick

Step 1: You call (216) 294-3900 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We'll walk the roof, check the attic if accessible, look at flashing and penetrations, and talk through what you're seeing. You get a written scope and a clear price before any work begins.

Step 2: Once you approve, we pull the permit if one is required for your project. For a full replacement or a metal roof over shingles, the city of Brunswick may require a permit and inspection, and we handle that coordination. On install day, our crew protects landscaping, stages panels efficiently on tight suburban lots, and works around your schedule. If your home is in an HOA, we can provide color and profile details for approval before ordering materials.

Step 3: We clean up daily and do a final walkthrough with you. That means magnet sweeping for screws, clearing gutters of debris, and making sure you know how the new roof drains and what to check after a big storm. We leave your property clean and your roof watertight.

Pricing in Brunswick depends on the job. For a typical ranch or split-level, metal roof installation starts around $8 per square foot, standing seam around $10, and a full replacement around $9. A retrofit over existing shingles starts at $7 per square foot, which is often a good fit for older homes with just one layer of shingles. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. Coating an existing metal roof starts at $2.50 per square foot. The biggest cost factors are roof size, pitch, how many layers are already there, access around the house, and whether there's storm damage. We give free estimates and won't pressure you. Call (216) 294-3900 to set one up.

My 1970s split-level near Brunswick High School gets ice dams every winter. Will a metal roof fix that?
It can help a lot, but it depends on the cause. Ice dams usually form when heat escapes through the attic and melts snow, which refreezes at the cold eaves. A metal roof sheds snow better than shingles, especially with a standing seam profile, but we also check attic insulation and ventilation during the estimate. Sometimes the right fix is a metal roof plus better attic air sealing. We'll tell you honestly what we see.
A storm just peeled back some panels on my roof off Route 303. Can you come out fast?
Yes. Storm and wind damage calls get priority. We'll do a free inspection, tarp or secure the area if needed, and give you a repair estimate. Call (216) 294-3900 and describe what you're seeing. If it's an active leak, we'll help you stop further damage before we schedule the permanent fix.
What does a metal roof over shingles cost on a typical Brunswick ranch?
For a ranch around 1,500 to 2,000 square feet, a retrofit over existing shingles often runs in the range of $7 per square foot, so roughly $10,500 to $14,000 depending on pitch, access, and trim details. A full tear-off and replacement typically starts around $9 per square foot. We give you a written estimate after seeing the roof, not a phone guess.
Do I need a permit from the city of Brunswick for a metal roof?
Usually yes for a full replacement or re-roof, and sometimes for a retrofit over shingles. Requirements and fees vary, so we confirm with the Brunswick building department before work starts. We handle the permit application and inspections as part of the job. If your home is in a historic district or HOA, there may be additional design review, and we can help with that paperwork.
My neighbor's tree limbs hang over my roof line. What do I do about branches and the property line?
In Ohio, you generally have the right to trim branches that cross onto your property, but you can't damage the neighbor's tree, and local rules can vary. If limbs are rubbing your roof or dropping debris that clogs gutters, we can document the roof condition for your records. For HOA approval on a new roof color or profile, we provide the specs you need to submit. We don't mediate neighbor disputes, but we'll give you clear information to work with.
Are you insured for work on my Brunswick property?
Yes. Cleveland Metal Roofing is fully insured with general liability and workers' compensation coverage. That protects you if anything goes wrong on the job.
What should I do to maintain a metal roof in Brunswick between seasons?
Keep gutters clear, especially after fall leaf drop and before winter. Check for loose screws or fasteners after high winds, and look at flashing around chimneys and skylights once a year. Snow guards help on steep pitches where snow slides dangerously. We offer inspections and maintenance plans. A quick call to (216) 294-3900 before winter can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Cleveland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Cleveland

All your work handled by qualified professionals in Cleveland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

230+ Verified Client Reviews in Cleveland

⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Cleveland · Response within 24h · No commitment · ☎ (216) 294-3900

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Cleveland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm