Serving the Cleveland area  ·  (216) 294-3900  ·  Open Mon-Sun 7am-7pm
📞 (216) 294-3900 Free Quote

Metal Roofing in Cleveland, OH (44101) · Local Professionals

Cleveland Metal Roofing · Fast response in Cleveland and the Cleveland area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+230Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Cleveland's brick doubles, Victorians, and bungalows take a beating from lake-effect snow and ice dams, and the steep gabled roofs in Tremont and Ohio City are not getting any younger. If you live near the Cuyahoga River valley or out in Collinwood, you know the freeze-thaw cycle is relentless. A metal roof here is not just a style choice, it is a long-term fix for snow load and hail.

Homeowners in Cleveland (44101) call Cleveland Metal Roofing because we understand the specific challenges of Northeast Ohio roofs: the heavy clay soil that shifts foundations, the historic districts that restrict panel profiles, and the lake-effect squalls that test every fastener. We have worked on everything from Craftsman bungalows in Detroit-Shoreway to 1960s colonials in Westlake, and we bring that experience to every free estimate.

Metal Roofing in Cleveland (44101)

Cleveland sits on a glacial plain cut by river gorges, and that terrain shapes how we roof here. The steep gables on Victorian and Queen Anne houses in Slavic Village and Tremont often have tight lot access, which means we plan material staging carefully to avoid damaging neighboring properties. In Shaker Heights and Cleveland Heights, the Tudor Revival and Colonial homes with slate or tile roofs require careful matching of metal shingle or standing seam profiles to maintain historic character. Out in Parma and Garfield Heights, the low-pitched roofs on Cape Cods and ramblers are prone to ice damming at the eaves, so we pay close attention to ventilation and snow guard placement. The heavy clay soil and tall sugar maples mean leaf debris clogs gutters fast, and we install gutter systems designed for metal roofs that handle the volume.

Our team has been serving Cleveland and the surrounding areas for years, and we have seen every kind of storm damage this city can produce. From wind-lifted panels after a nor'easter to punctures from fallen limbs during summer thunderstorms, we know how to repair and replace metal roofing so it performs through another Northeast Ohio winter.

Our services in Cleveland

How a Job Works in Cleveland

Step 1: You call us at (216) 294-3900 or request a free estimate online. We schedule an on-site assessment at your Cleveland property, where we inspect your current roof, check for active leaks, and discuss your options. We will also flag any historic district or HOA design review requirements that might affect your project.

Step 2: Once you approve the estimate, we pull the necessary permits from the local building department. In Cleveland, roofing permits are commonly required for full replacements, and thresholds vary by jurisdiction. We handle the paperwork and coordinate timing so your project stays on schedule. Our crews are fully insured and trained to work safely on steep roofs and tight lots, and we protect your landscaping and siding throughout the installation.

Step 3: After the work is done, we do a thorough cleanup, haul away all old materials, and walk the property with you to make sure you are satisfied. We leave your yard and driveway clean, and we do not consider the job finished until you have signed off.

Pricing for metal roofing in Cleveland depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind that code limits how many layers you can cover. Repairs for leaks or flashing typically start around $450, and screw replacement or re-fastening starts at $750. Snow guards and ice protection start at $1,200, which is a smart investment for high-elevation homes prone to ice dams. For a free estimate tailored to your Cleveland property, call us at (216) 294-3900.

My Victorian in Ohio City has a steep, complex roof with multiple gables. Can you install standing seam without damaging the original slate?
Yes, we have extensive experience with historic homes in Ohio City and Tremont. We assess the existing roof structure and often recommend metal shingles or standing seam panels that mimic the look of slate while providing modern durability. We take extra care with staging and use protective barriers to prevent damage to your landscaping and neighboring properties.
A storm just blew some panels loose on my roof in Collinwood. How fast can you respond for emergency repairs?
We prioritize storm damage calls and aim to get a crew out as soon as possible, often within 24 to 48 hours depending on demand. Call us at (216) 294-3900 to schedule an inspection. We will secure the area, document the damage for your insurance claim, and provide a repair estimate.
What is the typical cost to replace a low-pitched roof on a bungalow in Parma with a metal roof over shingles?
For a typical 1,200 to 1,500 square foot bungalow roof, a retrofit over existing shingles starts around $7 per square foot, so you might be looking at $8,400 to $10,500. However, if your roof has multiple layers already, we may need to remove them first, which adds cost. We provide a free on-site estimate to give you an accurate number.
Do I need a permit to install a metal roof in Cleveland, and how do I find out about historic district rules?
Yes, roofing permits are commonly required for full replacements in Cleveland, and fees and inspection requirements vary. If your home is in a historic district, design review may restrict panel profiles and colors. We recommend checking with the City of Cleveland website for general information, and we can help guide you through the permit process and any historic review requirements.
My neighbor and I share a property line, and I want to install a metal roof that might overhang slightly. What should I do?
Property line issues can be sensitive. We recommend reviewing your property survey and discussing your plans with your neighbor before work begins. If you are in an HOA, check the architectural guidelines first. We can adjust the design to stay within your property lines and coordinate with your neighbor if access is needed.
Are you fully insured for roofing work at my Cleveland home?
Yes, Cleveland Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage.
How often should I inspect my metal roof in Cleveland to prevent ice dams and snow damage?
We recommend an annual inspection in late fall before the snow flies, and after any major storm. Check for loose fasteners, sealant wear, and debris buildup in gutters and valleys. Snow guards should be checked for tightness. Regular maintenance extends the life of your roof and prevents costly ice dam repairs.
Why choose us?

Trusted professionals in Cleveland

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Cleveland

All your work handled by qualified professionals in Cleveland

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

230+ Verified Client Reviews in Cleveland

⭐⭐⭐⭐⭐ 4.9/5 · 230 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Cleveland · Response within 24h · No commitment · ☎ (216) 294-3900

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Cleveland ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm